8 inch 200mm PN16 manual type flanged cast iron rising stem sluice gate valve

Product Introduction

The gate valve is a kind of valve with opening and closing parts for the gate, and its direction of movement is perpendicular to the direction of the fluid, which can only be fully opened and closed, and cannot be adjusted and throttled.

Gate valves are sealed by the contact between the seat and the ram, and the sealing surface is usually overlaid with metal material to increase wear resistance.

Gate valves are widely used in pipelines, especially where large-diameter shut-off devices are required. Its advantages include small flow resistance, labor-saving opening and closing, water hammer phenomenon is not easy to generate, the medium can flow in any direction on both sides, compact structure, good manufacturing process, and wide range of application.

Installation instructions

1.Notice of water stop shall be issued before construction.

2.The water in the road should be avoided in the front row of construction.

3.Electricity for construction must be guaranteed.

4.It is strictly prohibited to use hand wheel, handle and transmission mechanism for hoisting and collision is strictly prohibited.

5.Lubricate the valve at least once a month if it is in frequent use.

Product parameters

Lots of inventory

Workshop display

FAQ

Q: What are your payment terms?

A: T/T (30% as deposit, the rest 70% will be paid before delivery), L/C at sight.

Q: Where is your nearest loading port?
A: Shanghai, Qingdao or Tianjin in China.

Q: What is the temperature range for gate valves?
A: -20℃-120℃.

Q: Is it possible to make gate valves of different sizes?
A: Of course, the above are all regular sizes, and we can customize them according to customer requirements.

Q: Do you accept small quantity order?
A: Of course we do.

The company adheres to the business philosophy of "customer satisfaction is our first duty, all employees are responsible for creating quality, continuous improvement sets new heights, honest service builds reputation", and wholeheartedly provides high-quality products and professional services to new and old customers.

The factory mainly produces rubber expansion joints, duckbill check valves, dismantling joint, bellow expansion joints, compensators, repair clamp, 02S404 national standard waterproof casings, gate valves ,butterfly valves etc; and all products have passed ISO 9001:2015 quality management system certification; adopting national and industry standards, advanced manufacturing technology, strong R&D and manufacturing capabilities, they are widely used in water supply, drainage, electricity, chemical industry, gas, metallurgy, urban construction and environmental protection and other pipeline industries.